1
0
yang b7ce0c7953 1 преди 3 години
..
.settings b7ce0c7953 1 преди 3 години
Debug b7ce0c7953 1 преди 3 години
MQTTClient b7ce0c7953 1 преди 3 години
MQTTClient-C b7ce0c7953 1 преди 3 години
MQTTPacket b7ce0c7953 1 преди 3 години
doc b7ce0c7953 1 преди 3 години
test b7ce0c7953 1 преди 3 години
.cproject b7ce0c7953 1 преди 3 години
.gitignore b7ce0c7953 1 преди 3 години
.project b7ce0c7953 1 преди 3 години
.travis.yml b7ce0c7953 1 преди 3 години
CMakeLists.txt b7ce0c7953 1 преди 3 години
CONTRIBUTING.md b7ce0c7953 1 преди 3 години
Makefile b7ce0c7953 1 преди 3 години
README.md b7ce0c7953 1 преди 3 години
THIRD PARTY OPEN SOURCE SOFTWARE NOTICE.docx b7ce0c7953 1 преди 3 години
about.html b7ce0c7953 1 преди 3 години
edl-v10 b7ce0c7953 1 преди 3 години
epl-v10 b7ce0c7953 1 преди 3 години
library.properties b7ce0c7953 1 преди 3 години
notice.html b7ce0c7953 1 преди 3 години
travis-build.sh b7ce0c7953 1 преди 3 години
travis-env-vars b7ce0c7953 1 преди 3 години
travis-install.sh b7ce0c7953 1 преди 3 години

README.md

Eclipse Paho MQTT C/C++ client for Embedded platforms

This repository contains the source code for the Eclipse Paho MQTT C/C++ client library for Embedded platorms.

It is dual licensed under the EPL and EDL (see about.html and notice.html for more details). You can choose which of these licenses you want to use the code under. The EDL allows you to embed the code into your application, and distribute your application in binary or source form without contributing any of your code, or any changes you make back to Paho. See the EDL for the exact conditions.

There are three sub-projects:

  1. MQTTPacket - simple de/serialization of MQTT packets, plus helper functions
  2. MQTTClient - high(er) level C++ client, plus
  3. MQTTClient-C - high(er) level C client (pretty much a clone of the C++ client)

The MQTTPacket directory contains the lowest level C library with the smallest requirements. This supplies simple serialization and deserialization routines. They serve as a base for the higher level libraries, but can also be used on their own It is mainly up to you to write and read to and from the network.

The MQTTClient directory contains the next level C++ library. This networking code is contained in separate classes so that you can plugin the network of your choice. Currently there are implementations for Linux, Arduino and mbed. ARM mbed was the first platform for which this was written, where the conventional language choice is C++, which explains the language choice. I have written a starter Porting Guide.

The MQTTClient-C directory contains a C equivalent of MQTTClient, for those platforms where C++ is not supported or the convention. As far as possible it is a direct translation from MQTTClient.

Build requirements / compilation

CMake builds for the various packages have been introduced, along with Travis-CI configuration for automated build & testing. The basic method of building on Linux is:

mkdir build.paho
cd build.paho
cmake ..
make

The travis-build.sh file has the full build and test sequence for Linux.

Usage and API

See the samples directories for examples of intended use. Doxygen config files for each package are available in the doc directory.

Runtime tracing

The MQTTClient API has debug tracing for MQTT packets sent and received - turn this on by setting the MQTT_DEBUG preprocessor definition.

Reporting bugs

This project uses GitHub Issues here: github.com/eclipse/paho.mqtt.embedded-c/issues to track ongoing development and issues.

More information

Discussion of the Paho clients takes place on the Eclipse Mattermost Paho channel and the Eclipse paho-dev mailing list.

General questions about the MQTT protocol are discussed in the MQTT Google Group.

More information is available via the MQTT community.